RME Audio Multiface User's Guide download pdf (Page 42)

User’s Guide HDSP System Multiface © RME

21. Accessories

RME offers several optional components, further increasing the flexibility and usability of the

HDSP system. Additionally parts of the HDSP system, like the special CardBus cable and the

switching power supply, are available seperately.

Part Number Description

36000 19“, 1UH Universal rack holder

This 19" rack holder has holes for Digiface and Multiface. Two units can be installed side by

side in any combination. The rack holder also includes holes for nearly all 19" half-rack units

from other manufacturers.

36001 Firewire cable IEE1394 6M/6M, 1 m (3.3 ft)

36002 Firewire cable IEE1394 6M/6M, 3 m (9.9 ft)

36005 Firewire cable IEE1394 6M/6M, 5 m (16.4 ft)

36010 Firewire cable IEE1394 6M/6M, 10 m (32.8 ft)

Firewire cable for the HDSP system, both sides 6-pin male. Cable longer than 16 ft is not

allowed for Firewire, therfore hard to get in computer shops. However the HDSP system can

operates flawlessly even with a cable length of up to 50ft (15 m).

36081 RME Firewire cable for CardBus 15/6M, 5 m (16.4 ft)

36082 RME Firewire cable for CardBus 15/6M, 1 m (3.3 ft)

Special cable 15-pin close Lan coded to 6-pin male, for RME CardBus card.

36003 Optical cable, Toslink, 0.5 m (1.5 ft)

36004 Optical cable, Toslink, 1 m (3.3 ft)

36006 Optical cable, Toslink, 2 m (6.6 ft)

36007 Optical cable, Toslink, 3 m (9.9 ft)

36008 Optical cable, Toslink, 5 m (16.4 ft)

36009 Optical cable, Toslink, 10 m (32.8 ft)

Standard lightpipe with TOSLINK connectors, RME approved quality.

36011 RME FW Repeater for Digiface/Multiface 6F/6F

Active receiver/transmitter to extend the cable length of the HDSP system. Can not be used as

Firewire repeater! Using two Repeaters and 10 m Firewire cables, up to 30 m (100 ft) can be

realized between interface and I/O box. Switchable ground lift is also available, to avoid ground

loops and disturbances due to different power sources.

37011 Power supply for HDSP CardBus card

Robust and light weigth switching power supply, 100V-240V AC, 12V 1.25 A DC. Also

neccessary when operating the Repeater in ground lift mode, cause Digiface and Multiface will

no longer be powered from the computer (the PCI interface).

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 48

No comments

RME Audio Multiface User's Guide Page 42