RME Audio ADI-1 User's Guide download pdf (Page 5)

User's Guide ADI-8 DS © RME

4. Technical Specifications

• Power supply: Internal, 100-240 V AC, 30 Watts

• Typical power consumption: 12 Watts

• Dimensions including rack ears (WxHxD): 483 x 44 x 242 mm (19" x 1.73" x 9.5")

• Dimensions without rack ears/handles (WxHxD): 436 x 44 x 235 mm (17.2" x 1.73" x 9.3")

• Weight: 2 kg ( 4.4 lbs)

• Temperature range: +5° up to +50° Celsius (41° F up to 122°F)

• Relative humidity: < 75%, non condensing

4.1 Analog Specs

• Resolution AD: 24 bit

• Signal to Noise ratio: 113 dB RMS unweighted, 117 dBA

• THD: < -110 dB, < 0.00032 %

• THD+N: < -104 dB, < 0.00063 %

• Crosstalk: > 130 dB

• Maximum input level AD: +19 dBu

• Frequency response AD, -0.1 dB: 5 Hz – 21.5 kHz

• Input Line: 1/4" TRS and 25 pin D-sub, servo balanced

• Input impedance Line: 10 kOhm

• Input sensitivity switchable: +4 dBu, -10 dBV, Lo Gain

• Input level for 0 dBFS @ Lo Gain: +19 dBu

• Input level for 0 dBFS @ +4 dBu: +13 dBu

• Input level for 0 dBFS @ -10 dBV: +2 dBV

• Resolution DA: 24 Bit

• Dynamic Range: 112 dBA (unmuted)

• THD: < -104 dB, < 0.00063 %

• THD+N: < -102 dB, < 0.0008 %

• Crosstalk: > 110 dB

• Maximum output level DA: +19 dBu

• Frequency response DA, -0.1 dB: 5 Hz - 21,6 kHz

• Output Line: 1/4" TRS and 25 pin D-sub, servo balanced

• Output impedance Line: 47 Ohm

• Output level switchable: Hi Gain, +4 dBu, -10 dBV

• Output level at 0 dBFS @ Hi Gain: +19 dBu

• Output level at 0 dBFS @ +4 dBu: +13 dBu

• Output level at 0 dBFS @ -10 dBV: +2 dBV

4.2 Digital Specs

• Super Low Jitter Design: < 4 ns word clock PLL, < 1 ns ADAT PLL, < 1 ns internal

• Internal sample rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz

• Word clock In range: 27 kHz - 57 kHz

• Internal resolution: 24 bit

• Outputs: ADAT optical (24 bit), TDIF-1 (24 bit), word clock

• Inputs: ADAT optical (24 bit), TDIF-1 (24 bit), word clock

• ADAT In clock range: 33 kHz - 57 kHz

• Bit Split: 24 bit to 1 channel 16 bit and 1 channel 8 bit

• Sample Split: 96 kHz to 2 channels of 48 kHz

• Copy Mode: Direct 24 bit copying from ADAT to ADAT/TDIF and vice versa

• Dither: 1 LSB TPDF switchable

1 2 3 4 5 6 7 8 9 10 ... 22 23

Comments to this Manuals

No comments

RME Audio ADI-1 User's Guide Page 5

Comments to this Manuals