RME Audio MADI Bridge User's Guide download pdf (Page 11)

User's Guide MADI Bridge © RME

9. Configuration Examples

9.1 Distribution 1 to 8

Use the Up/Down keys to select 'INPUT 1' on all channels. The

matrix displays a horizontal line in the most upper line.

The input signal from input 1 is now sent to all eight outputs of the

MADI Bridge at the same time (in parallel).

9.2 Passing on the signal

Use the Up/Down keys to set all inputs one below the current output

channel. Output 1 is set to input 8, output 2 to 1, output 3 to 2 and so

on. The matrix shows a 45° line from upper left to lower right, shifted

one LED to the right of the red LEDs. In this configuration the input

signal 1 is sent to the output 2, input 2 to output 3 and so on. With

this, all MADI devices are connected in a serial way.

9.3 Conversion Optical to Coaxial and vice versa

Of course, the MADI Bridge can also serve as format converter from coaxial to optical, and at

the same time from optical to coaxial. Thanks to its two optical I/Os, both functions are even

available two times.

Coaxial to optical: Configure output 7 and/or 8 to use one of the six

coaxial inputs.

Optical to coaxial: Configure output 1 to 6 to use the optical input 7

and/or 8.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 20 21

No comments

RME Audio MADI Bridge User's Guide Page 11